This is an outdated version published on 2021-07-30. Read the most recent version.

Study on employability of mechanical engineering graduates from Sunyani Technical University of Ghana

Authors

  • Bernard Aboagye Department of Mechanical Engineering, Sunyani Technical University
  • Julius Puoza Department of Mechanical Engineering, Sunyani Technical University

DOI:

https://doi.org/10.21153/jtlge2021vol12no2art1002

Abstract

Although the Government of Ghana gives considerable attention to technical education to accelerate national development, some graduates remain unemployed for years after graduation. In this study, employability of mechanical engineering graduates from Sunyani Technical University of Ghana is presented. It assessed the employment status and duration of unemployment of the graduates, identified the factors that hinder their employability and the challenges that require attention prior to graduation of students, and made suggestions for improvement. Respondents of the study were 131 graduates from 2014-2017 graduation years, comprising 50% of graduates from each of the Program options in the department. The sampling techniques used were purposive and stratified random sampling techniques. A questionnaire was the research instrument used for data collection and it was administered using e-mails, WhatsApp and phone calls. The results revealed that the employment status of the graduates was about 84% with the duration of unemployment about 29%, 41% and 19% for one, two and three years after their national service respectively. The main factor hindering employability of the graduates was inadequate practical skills since more attention was given to theory at the expense of practical work. The main challenge which requires attention prior to graduation of students was the lack of job-seeking skills. The Department should therefore, focus more on the practical element of the Programs by increasing the practical hours and partner with industry for curriculum development, more internship opportunities and industrial tours, and organise seminars on job acquisition processes prior to graduation of students to enhance employability of the graduates.

Metrics

Metrics Loading ...

Author Biographies

  • Bernard Aboagye, Department of Mechanical Engineering, Sunyani Technical University

    Bernard Aboagye is a PhD candidate in Sustainable Energy Systems at University of Energy and Natural Resources, Ghana. He is a Senior Lecturer at the Department of Mechanical Engineering, Sunyani Technical University. He has taught in this Department for over 11 years. His core research area is water supply infrastructure engineering and management, and solar energy application in water pumping systems. He has published seven technical papers in both national and international refereed journals. https://orcid.org/0000-0003-2912-7948

  • Julius Puoza, Department of Mechanical Engineering, Sunyani Technical University

    Julius Caesar Puoza holds a PhD in Mechanical Engineering from the Jiangsu University, Zhenjiang, China and Senior Lecturer of Sunyani Technical University, Ghana. His research field is manufacturing technology, tribology and mathematical modelling. He has published 14 research articles in these areas in international refereed journals. He is a member of the American Society of Mechanical Engineering (ASME). https://orcid.org/0000-0001-5364-8650

References

Afeti, G., & Adubra, A. L. (2014). Skilling Africa: The paradigm shift to technical and vocational skills development. Association for the Development of Education in Africa (ADEA). Retrieved (14 April, 2020) from http://www.adeanet.org/en/blogs/skilling-africa-the-paradigm-shift-to-technical-and-vocational-skills-development

Amoa-Mensah, K. (2007). Ghana at fifty: The multiplying effects of technical education on the socio-economic development of Ghana. G.S.T.S Centenary Anniversary Lectures (1909 -2009). Kumasi, Ghana, (Not published).

Aryeetey, E. (2011). Jobs are our greatest worry. Modern Ghana, 12th September, 2011. Retrieved (12 January, 2020) from https://www.modernghana.com/news/350137/jobs-are-our-greatest-worry.html

Azami, Z., Omar, M. Z., Basri, H., Muhamad, N., & Isa, F. L. M. (2009a). A gap study between employers’ perception and expectation of engineering graduates in Malaysia. WSEAS Transactions on Advances in Engineering Education, 6(11), 409–419.

Azami, Z., Yuzainee, M. Y., Omar, M. Z., Azah, M., & Norhamidi, M. (2009b). Engineering employability skills required by employers in Asia. Paper presented at the Proceedings of the 6th WSEAS International Conference on ENGINEERING EDUCATION, 195–201. Rodos, Greece. Retrieved (03 March, 2020) from http://www.wseas.us/e-library/conferences/2009/rodos/EDU/EDU30.pdf

Azami, Z., Yuzainee, M. Y., Omar, M. Z., Azah, M., Norhamidi, M., & Ramlee, M. (2009c). Perceptions and expectation toward engineering graduates by employers: A Malaysian case study. WSEAS TRANSACTIONS on ADVANCES in ENGINEERING EDUCATION, 6(9), 296–305.

Baah-Boateng, W. (2015). Unemployment in Ghana: A cross sectional analysis from demand and supply perspectives. African Journal of Economic and Management Studies, 6(4), 402–415.

Bhaduri, A., Banerjee, K., & Moughari, K. (2015). Fight against unemployment: Rethinking public works programs. Real-World Economics Review, 72, 174–185.

Biney, I. K. (2015). Exploring graduate unemployment problem in Ghana: Challenges and strategies. Journal of Education, 3(2), 1–18.

Boakye-Agyeman, N. A. (2006). Polytechnic education in Ghana: The Case of the HND Estate Management Program. Paper presented at the 5th FIG Regional Conference, Accra, Ghana, 8-11 March, 2006.

British Council (2016). Universities, employability and inclusive development: Repositioning higher education in Ghana, Kenya, Nigeria and South Africa. British Council. Retrieved (22 April, 2020) from https://www.britishcouncil.org.gh/sites/default/files/universities_employability_and_inclusive_development.pdf

Donkor, K. B. (2014). Graduate unemployment levels alarming. Graphic Online (12th April, 2014). Retrieved (13 October, 2019) from https://www.graphic.com.gh/news/general-news/graduate-unemployment-levels-alarming-tuc.html

Cai, Y. (2013). Graduate employability: A conceptual framework for understanding employers’ perceptions. Higher Education, 65(4), 457–469.

Constantinescu, M. (2015). Long term unemployment and low wage work implications on security and development. Journal of Defense Resources Management (JoDRM), 6(1), 41–44.

Cyphert, D., & Lyle, S. P. (2016). Employer expectations of information literacy: Identifying the skills gap. In B.J. D’Angelo, S. Jamieson, B.Maid, & J.R. Walker (Eds.), Information literacy: Research and collaboration across disciplines (pp.51–76). Fort Collins, CO: WAC Clearinghouse and University Press of Colorado.

Dalrymple, O., & Cox , M. F. (2006). Work in progress: Undergraduate engineering students' perceptions of engineering education as an academic discipline. Paper presented at the 36th ASEEIIEEE Frontiers in Education Conference, San Diego, CA pp. SIG-l - SIG-2.

Enu, P., & Havi, E. D. K. (2014). The manufacturing sector of Ghana: Are there any macroeconomic disturbances? Asia Pacific Journal of Multidisciplinary Research, 3(2), 111–122.

Ezit, L. (2014). Teach entrepreneurship in tertiary institution. Daily Graphic (26th April, 2014), p.38.

Frimpong, A. (2011). Converting polytechnics into technical universities. Critical issues that must be addressed. Ghana Employers Association (GEA), Accra, Ghana, (Not published).

Ghana Statistical Service (2015). 2015 Labour Force Report. Ghana Statistical Service: Accra, Ghana

Government of Ghana (1991). White Paper on the Reforms to the Tertiary Education System. Government of Ghana: Accra, Ghana

Government of Ghana (1992). Polytechnics Law, 1992; PNDC Law 321. Government of Ghana: Accra, Ghana.

Government of Ghana (2007). Polytechnics Act, 2007; Polytechnic Act, 745. Government of Ghana: Accra, Ghana.

Government of Ghana (2016). The Technical Universities Act, 2016 (Act 922). Government of Ghana: Accra, Ghana.

Government of Ghana (2017). The Technical Universities (AMENDMENT) ACT, 2017. Government of Ghana: Accra, Ghana.

Jonah, S. (2011). University graduates must fashion out own destiny. Daily Graphic (3rd October, 2011), p.10.

Kamsah, M. Z. (2004). Developing generic skills in classroom environment: engineering students' perspective. Paper presented at the Conference On ENGINEERING EDUCATION (CEE 2004), Kuala Lumpur. l4-15 December 2004.

Kigotho, W. (2014). Universities must share blame for critical skills shortage. University World News, 28th March 2014, Issue No: 128. Retrieved (03 March, 2020) from https://www.universityworldnews.com/post.php?story=20140327191835351

Lee, F. T. (2003). Identifying essential learning skills in students' engineering education. Paper presented at the 26th HERDSA Annual Conference, Christchurch, New Zealand, 6-9 July 2003.

Lisá, E., Hennelová, K., & Newman, D. (2019). Comparison between employers’ and students’ expectations in respect of employability skills of university graduates. International Journal of Work-Integrated Learning, 20(1), 71–82.

Ministry of Education (2012). Education Strategic Plan 2010-2020. Policies, Strategies Delivery and Finance. Ministry of Education: Accra, Ghana.

Mohamad, N. H., Selamat, A., Ibrahim, B., & Salleh, B. M. (2019). Exploration of spiritual elements in Holistic Entrepreneur (Holistic-E) among TVET graduate students. Journal of Technical Education and Training, 11(3), 73–83.

Motsoeneng, L., Schultz, C., & Bezuidenhout, A. (2013). Skills needed by engineers in the platinum mining industry in South Africa. Paper presented in the Proceedings of PICMET ’13: Technology Management in the IT-Driven Services (PICMET), San Jose, CA. pp.1738–1745.

Nsiah-Gyabaah, K. (2005). Polytechnic education in Ghana: The past, the present and the future. Paper presented at the Kick-Off Conference, NPT/UCC Project, University of Cape Coast, May 20-22.

NUFFIC ( 2011). Alignment of higher professional education with the needs of the local labour market: The case of Ghana. NUFFIC: The Hague.

Perkins, J., & Nigel, F. (2015). Engineering and technology skills and demand in industry: Overview of issues and trends from 2015 survey. The Institution of Engineering and Technology.

Sahu, A. R., Shrivastava, R. L., & Shrivastava, R. R. (2008). Key factors affecting the effectiveness of technical education– An Indian perspective. Proceedings of the World Congress on Engineering 2008, London, U.K.

Sasa, Y. (2018). Main causes of unemployment in Ghana. Retrieved (03 March, 2020) from https://yen.com.gh/109415-main-unemployment-ghana.html

Shahrin, M., Hasanan, M. N., Omar, W., & Danial, M. (2004). Enhancing teaching and learning through the incorporation of generic skills for civil engineering undergraduates. Paper presented at the Conference on Engineering Education (CEE 2004), Kuala Lumpur. 14-15 December, 2004.

Smith, E. E., & Kruger, J. (2008). A critical assessment of the perceptions of potential graduates regarding their generic skills level: An exploratory study. South African Journal of Economic and Management Sciences, 11(2), 121–138.

Spinks, N., Silburn, N. L., & Birchall, D. W. (2007). Making it all work: The engineering graduate of the future, a UK perspective. European Journal of Engineering Education, 32(3), 325–335.

Trevelyan, J. P. (2008). Early career learning by novice engineers. Pittsburgh, PA: School of Mechanical Engineering.

UNESCO (2010). Engineering: Issues challenges and opportunities for development. UNESCO Publishing.

Williams, P. (1976). The school leaver in developing countries. London: University of London Institute of Education.

Downloads

Published

2021-07-30

Versions

Issue

Section

JOURNAL PAPERS

How to Cite

Aboagye, B., & Puoza, J. (2021). Study on employability of mechanical engineering graduates from Sunyani Technical University of Ghana. Journal of Teaching and Learning for Graduate Employability, 12(2), 185-205. https://doi.org/10.21153/jtlge2021vol12no2art1002